Friday, November 8, 2013

Repairing Old Shoes

Welcome back faithful readers, we love you guys. We are getting more and more page views per month and people are staying longer on the site, so we wanted to thank you for that. Makes it all worth it, I'd say. And if you have recently found us, welcome aboard and we hope you enjoy the ride.

Occasionally, (our shoes are very durable!) we get some old shoes back for repair. This is always an interesting moment because you can see how your making stands up to the way people walk in their shoes. This week we had three pairs back from one of our first customers from 2004. So these babies are 9 years old.



We assessed what needed doing and let the customer know. We only repair our own shoes, so it is not something we do very often. Two of these pairs needed a complete resole and one a general service which includes some or all of the following - top pieces, toe plates, laces, sticker sole and polish

We started with the simple wholecuts on the right. They were the most worn (and loved hopefully)




The sole was very worn, but still wearable. Notice the wear backwards from the joint - this means a new shank to give some more support.




You can see here how worn it was. This sole was originally a 1/4" but is now less than 3/16"




Before you start, you will need one of two things - the original lasts back in the shoes, or a pair of well fitting wooden trees. We use the bespoke trees we provide with the shoes.
The process starts with removing the heel. The top piece is thrown away and will be replaced with a new one.
Weirdly, some repairer he had used had put the top pieces on with the quarter rubber on the inside instead of the outside, so the leather had worn away, not the rubber part. Always go to someone who knows what they are doing!







Now to remove the heel. It is important to keep all the heel lifts as you remove them because you need them to build the heel again once you have stitched on a new sole. This way you can just put the heel back together and it will be balanced and correct. If you use new lifts, you have to do all the skiving and balancing again.
The general technique is to prise a lift at a corner with a screwdriver and then pull it off with some nippers. Be careful not to damage the lifts.
This is where you will be glad you used paste and nails not neoprene/contact adhesive. You always have to think about repairs when you are shoemaking.



Label the lifts L1, L2, L3 and R1, R2, R3 so that you know which is which. Store them safely.




Stop when you get to the split lift/rand.




Gently peel back the split lift/rand, but don't remove it completely.



Fold it back and nail it into position. This makes life much easier when you come to rebuild the heels.



Next you have to remove the sole. Usually the stitches are worn at the toe so you don't have to cut them. Once you have started the process, it is fairly easy. If need be, use the knife to cut the stitches but be very careful not to cut the welt.




Peel the sole back to the heel, like this. And then cut the sole at an angle like in the picture below. Make sure you have removed any nails first.






Remove any bits of stitches which show up above the welt so that the welt looks like this. Don't try to remove the stitches from the top of the welt. You will simply restitch over the top of them.
At this stage you should check the shank and the filler. We use leather shanks and we put a new one in to give it some extra rigidity. We used felt filler here and it was fine. Cork will need replacing after so long.




Soak and mellow your sole (you should have done this the day before really). Cut it out to size. You will need to cut a bevel at the heel area to match the one you cut on the original sole so that they dovetail together.
If you are making a sole to a specific thickness, you will need to skive the edge.




Hammer the sole with a flat headed hammer so that it lasts longer.




Glue it into place, making sire the heel join is neat. Put a few nails in to secure it




Trim it to size.




Cut your channel.




And stitch, baby, stitch! Remember to stitch through the original hole in the welt, otherwise the welt be be destroyed. Also, be careful when taking out the awl from the hole to avoid pulling out the original stitches and making the welt look fuzzy.




Next week we will build the heels and finish the repair. Until then, happy shoemaking!

Friday, November 1, 2013

The Art of Fitting and Selling Shoes


 The last few styles of Gieves & Hawkes' fabulous (if we say so ourselves), new, ready to wear shoe collection came in this week. 

So, we have been busy giving the shop floor team a refresher in fitting and selling shoes. I'm not sure retailers usually bother with this - kids' shoe shops seem to be the only ones where any kind of fitting is done - but to sell men's shoes well, you need to know what you are talking about especially when it comes to fit. 


This advertising slogan from the 1930s says it all.

This slogan is taken from a volume of F.Y.Golding's books "Boots & Shoes their Making, Manufacture and Selling". Comparing our fitting notes with theirs, not much has changed in 100 years. The x-rays of feet in shoes below are a great illustration of what to and what NOT to look for!

1. Room for the toes - shoes will not stretch lengthwise so if the toes touch, the shoes are too small!

Above top: the shoe is too cramped for the toes
Above bottom: the shoe fits well with adequate space for the toes

 2. The heel and big toe joint need to be correctly positioned so that the shoe and foot flex together and the toes stay relaxed 


Here the heel to joint fit is incorrect
 - the shoe is too big for the foot
- the heel and big toe joint are too far forward
- the toes are scrunched up to hold the shoe on.


Here the heel to ball fit is good:
- the heel sits back into the shoe
- the ball of the foot is correctly positioned
- the toes are relaxed.
 3. A comfortable fit between the heel and the top of the foot (the instep) is needed that does not put pressure on the instep and holds the heel in place without slipping


Here, the salesman allows the customer to slip his foot into the shoe;
the angle of the foot rest encourages the foot to naturally sit back into the heel of the shoe. 

In Gieves' ready-to-wear shoes, the last has a deep, slightly elongated toe box to offer more toe space for different foot shapes and cushioned socks for an immediate feeling of comfort and support. (The cushioning takes up space in the shoe so a little extra room has been added to the lasts to allow for it).





Shoe fitting tips:

- Know your shoe styles
- Know feet and get used to handling them (!)
- Never discuss size (we know what a sensitive subject it can be!!!)
- Initially try a bigger size, so the first experience is of space not pain
- Ask the customer to remove both of their shoes before trying on the new pair. Having one old shoe and one new shoe on is an unfair comparison. An old pair of shoes naturally feels more comfortable than new shoes.
- Let the customer slip their foot into the shoe, do not put the shoe on the foot - encourage them to use a shoehorn to put the shoes on (fingers will stretch the shoes at the back)
- Allow the customer to make the choice as far as possible, with guidance
- Do not sell a pair of shoes that do not fit - it is a false economy
- Offer an alternative style of shoe, if the first style choice does not work for the customer's feet. 

A high instep will benefit from a Derby or Monk strap shoe rather than an Oxford, as will a foot that swells during the day; a wide foot will work better in a Derby, Loafer or suede shoe; a narrow foot and heel will work better in an Oxford; a wide foot will benefit from a suede shoe or one without a wing cap or seams across the vamp




It is often hard for the customer to articulate what feels wrong or right. These pictures show a lady and a salesman using a Pedoscope. This contraption allowed the customer to see how their feet looked in a pair of shoes and took x-rays of them, like the ones shown. What a brilliant idea! But where have all of the Pedoscopes gone? Has anyone seen one or better yet tried a Pedoscope? 

Until we get our hands on one, the team at Gieves will just have to rely on good, old-fashioned know-how!  

Until next week, happy shoemaking!

Friday, October 25, 2013

Setting up a shoemaking work space

First off congratulations to Frances, Marco and Mathilde who finished their two-week intensive last Saturday. There were some beautifully finished edges, so much so, that one student was allowed to do a natural finish! See the results for yourselves. 



 
 


 

More and more students want to keep on making, but how much room do you need to set up a shoemaking bench? Well. when we first arrived at Gieves & Hawkes we luxuriated in the 'goldfish bowl' on the shop floor, giving visitors to No.1 a glimpse into the world of Cordwaining. Three years later, we now have a beautiful display of bespoke shoes on the shop floor and we have joined the cutters in the heart of the store's tailoring workrooms.


It is a great working environment and we were fortunate to have a bright, airy space purpose-built to our needs. In terms of space, you really don't need very much, but it is good to use walls and ceilings to their utmost. Good light, ventilation and a sink are a must.

Space wise, you need room to open your arms to their maximum and space to sit behind a low table. Our new space measures some 3m square and incorporates rails overhead to carry our clients' lasts and bends of leather...


a desk for stationery, packing materials, our measuring kit, first aid kit, laptop and telephone. (Underneath is room to store leather samples and laces).


A workbench and chair, standing some 75cm high, with tools in pots and hung from the table edges, a spotlight for close work...


and less-often used tools and materials stored in the antique drawers to the side. Purpose-built shelves to the opposite side, house some of the work in progress waiting to be delivered and for fittings.


Our contact adhesives and burner are stored in a special fire-proof/chemical store cabinet...and other tools and templates are hung on the wall partly as a display, but also within easy reach from the bench.


Hand-held tools are an important part of the storytelling around our brand and product - after all,  they are what we use every day to make our shoes - so it is irksome when other brands try to claim a handmade element in their marketing. The example below is case in point. Can anyone guess which brand these 'handmade' shoes are from?



You'll know what we mean when you see them in reality...fortunately we think that most customers are discerning enough to recognise the authentic from the inauthentic.

Until next week, happy shoemaking!


Friday, October 18, 2013

First October Intensive Shoemaking Course

Welcome back, dear shoe people of the world. Another week flies by in the wonderful world of shoemaking

This week sees the end of the first carréducker Intensive Shoemaking Course in October. Due to the popularity of the courses, we have introduced two new ones each year. A second one in August and one now in October. Rather than turning people away or making them wait for ages, we thought it was better to offer more opportunities to make handmade shoes with us.

Yesterday saw them finishing their heels and today will be spent rasping, glassing and sanding their heels and edges. It's the final push to their own little Everest of completing a pair of hand stitched shoes. So well done to them.




And speaking of students' shoes, we're asked time and again what the quality of the shoes are like that students make on the course. Well, it often depends on the student and their reason for taking the course. This summer, one very determined (and very much in love) gentleman, whose hands had never seen anything other than a keyboard, challenged himself to make his own wedding shoes. So, no pressure!  How did he do? See for yourselves...




A dream wedding in Italy with the groom as resplendent as the bride (well, kinda). Nice job Ira Babb of Texas.


Mr and Mrs Ira Babb 
(Mr Babb is wearing his own dark tan, handsewn, calf shoes with green laces).
Congratulations!

So, you can see that students come to us for all sorts of reasons, although recently, more and more of them are really serious about becoming full time bespoke shoemakers which is really pleasing. This blog has an amazing reach and we are so glad that so many of you read it each week..

So, if you fancy giving it a go, go to our website, download a booking form and book yourself a place. We have 5 intensives next year, 3 pattern making classes and 1 evening class in London.

http://carreducker.com/shoemaking-courses

We look forward to hearing from you.

Until next week, happy shoemaking!