Showing posts with label uppers. Show all posts
Showing posts with label uppers. Show all posts

Friday, September 26, 2014

A Good Break



This week has been a busy one of fittings and adjustments for a client with enlarged big toe joints and a nerve problem in his right foot, but not his left. This means that both lasts have prominent fittings to accommodate the joints and the right shoe needs to be wider than the left at the vamp to ensure that the toes are not cramped.

Naturally the shoes still need to look like a pair, so we have used felt to pad out the left shoe, between the lining and the upper, so that they look similar. 



It has also been an exercise in fine tuning the fit, to create the room needed at the toes and at the big toe joint, without inadvertently creating bad break. Break - where leather folds and creases against itself - is a vital consideration in footwear where the vamp folds and creases as you walk.


Bad break is where there is too much leather in the vamp, creating deep creases which dig into the foot when it flexes or where the shoe is not the right length for the foot; too short and the vamp will break too far forward, too long a shoe and the vamp will break too close to the quarters and laces. Good break is tight, shallow creasing across the vamp behind the toes.

To make good break on this client's shoes, we lowered the fore part of the last diagonally from the big toe joint across to the outside feather and at the toes. We also soaked the uppers and lasted them mellow, so that they shrunk down onto the lasts. The result, tight creases and a good looking and accommodating fit.   


Obviously well fitting shoe trees are also an important part of the picture. They help to smooth out the creases in the vamp when the shoes are not being worn and prevent dirt and moisture from building up in the creases.


There is a great post on the Horween blog if you would like to find out more about leather properties and 'break'. Until next week happy shoe making!

Friday, January 4, 2013

Happy New Year

And here we are in 2013. We hope you had a fantastic festive period and a wonderful New Year. We certainly did with 12 days off work which is very rare and very welcome. We had our first day back yesterday which was, as you can imagine, a bit hellish. Needless to say, we have not done much shoemaking this week, so we do not have much to share with you.

What we can show you is some of the work which we have stacked up waiting to be done. So here goes.

First up is a pair of deer skin Derby shoes with a green shrunken calf facings detail. This is a second pair, so we can get on and make them straight away without the need for fittings.
The deer skin is very soft and because it is from a wild animal (culled in Scotland) it is uneven, with slight blemishes which gives it an interesting patina.




Next is a pair of our classic black Oxfords with a red kid lining. The customer designed the toe medallion. These are for a fist fitting, so we will brace them to a piece of insole and see the customer as soon as possible.



Next up is a pair of Derby boots in chocolate brown grain with shearling lining and purple slip beading on the top edge.




Love the slip beading, very stylish.




And these are going to be very warm winter boots. With a rubber sole? Not sure yet, will have to check with the ticket.




This is a pair of ladies pumps which are ready to brace for a first fitting. We have made a fitter upper because we anticipate a few problems with this customer in terms of fit and her fist pair will take some time to perfect. Once we have it right however, she will be able to order many more pairs.
We often make a fitter upper if we are expecting a difficult fitting stage or if the leather is particularly delicate.





And lastly, a third pair for a very good client of ours. He already has a pair of these and wants another. Obviously we are happy to oblige.


He is having a rubber Dainite sole, so we have to last them and welt them including the seat. We then send them to a company which stitches on the sole. You can't stitch on a rubber sole by hand unless you have a hollow awl which makes a hole. If you use a regular awl, the hole just closes up when you take the awl out.
They will look like this.


And that is it for this week. We wish you all a very prosperous 2013 and hope you will continue to read our blog.

And we also hope that you will continue to comment on what you read - we are always glad to hear from you.

Until next week, happy shoemaking!

Friday, December 21, 2012

Hand Stay Stitches And Merry Christmas

Hello, one and all. Welcome to the final blog post of 2012. It's been an amazing year and we thank every single one of you who has read our posts; commented on them; become a Follower (please more of you do it, pleeease!); or had any other kind of contact with us. With this in mind, Deborah (yes, it was all her own work) has created a Christmas greeting for all of you.


So, yes, merry Christmas and happy New Year to all of you. And let's hope 2013 is a fruitful and magical year for all of us.

And so to shoemaking. One of the things which mark out bespoke, handsewn shoes is the closing - both its quality and the hand work which is a feature of it.
One of the things which sets our saddle loafers apart is the stay stitches on the band.



There is a total of 16 on this pair which we had to do one by one. And here is how we did it.

You start with the thread which we made with two cords of the hemp thread we use. We used our light thread wax with a layer of tar on the top to make it black. Once it is burnished, the thread turns black.
Attach a bristle to each end.

Then you have to mark the holes on the upper with a silver pen. The upper is totally finished and the stay stitches will go through the upper and the lining.


To make the holes, you can use a straight pricking awl or a nail on a cutting board. I like the nail because it makes a small hole.


For the first stitch, put each bristle through each hole.


Then tie a tight double knot on the inside. Cut the threads and tie the ends in a knot with as little spare thread on the end of the knot.


From now on, you have to start each stay stitch on the inside. Put one bristle through a hole, across the top and in through the other hole. Tie the two ends of the thread together in a tight knot and cut the ends. Tie them together again and do exactly the same thing on the next stay stitch.



This is what the stitches should look like on the inside.


The last process is very important. The knots in the thread, even though they are small, could dig into the foot and irritate the wearer. So you have to hammer them flat. Take a lap iron or a cobbling jack. The surface must be flawlessly smooth. The hammer you use must also have a flawless head with no nicks or scratches. Hammer the knots flat.

And that is that. The uppers are ready to last.

Hand stitches look fantastic but they also have a function. They give strength to the shoe in places where they suffer the greatest stress while walking. For example, we use them on Derby/Gibson shoes to stop the facings opening too much.

Here are a couple of examples. Be inventive because people notice these small details.



And so we come to the end of 2012. Providing the world doesn't end today (it's looking good so far, although does the apocalypse respect our international time zones? If Australia makes it through today, are we all ok? ), we look forward to welcoming you back in January. Until then, with a well earned rest to enjoy - happy shoemaking!